Edimax-technology PS-1206MFG Manual de usuario descargar pdf (Pagina 112)

104

10. Set the “Alias Name” and the “Server Description” here. Click on “Next”.

Note: You can define the location or other information of the MFP Server

for easy to find the MFP by filling “Server Description”.

11. The MFP Server will try to determine your network settings. If a DHCP

Server is present, the MFP Server will automatically obtain and configure

the network settings assigned by the DHCP Server. If no DHCP Server is

present, please assign the network settings of the MFP Server manually.

By default, the network settings of the MFP Server in “Manual IP” selection

are as below.

IP Address: 192.168.2.2

Subnet Mask: 255.255.255.0

Please click “Next” once you have found appropriate network settings for

the MFP Server.

Note: The MFP Server IP Address should be in the same network segment

with the connected computer. If the network settings are incorrect, a

message will be prompted to remind you after you click “Next”. Please

make sure that you have set the right settings before going to the next step.

If you don’t want to set it now, please click “Cancel” to finish the installation.

You can then use the “Server Manager” utility to configure the MFP Server.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 141 142

Sin comentarios

Edimax-technology PS-1206MFG Manual de usuario Pagina 112