Edimax-technology PS-1206MFG Manual de usuario descargar pdf (Pagina 131)

123

3. Add an entry to the host’s /etc/printcap file, similar to the following:

printer-name:\

:lp=:\

:rm=203.66.191.186:\

:rp=lpt1:\

:lf=/var/spool/lpd/pserverd.log:\

:sd=/var/spool/lpd/pserverd:\

:mx#0:

Lines should be indented with tabs. More than one printer name can be

used, with variants separated by vertical bars (name1|name2).

The rm= entry should correspond to the IP address you have assigned to

the MFP Server. You can also use a host name if you have assigned one

in the /etc/hosts file.

The sd= entry should correspond to the spool directory you created in the

previous step.

The rp= entry should correspond to the port name of the remote printer.

The values should be one of lpt1, lpt2 or lpt3 depends on the printer port.

The MFP Server should now be available for printing from your Unix/Linux

host.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 141 142

Sin comentarios

Edimax-technology PS-1206MFG Manual de usuario Pagina 131